TechLine Mfg. offers a modular instrument stand system, allowing you to configure the instrument stands as you need them for field-mounted instrumentation.  The system is composed of separate components that can be combined to assemble an instrument support.  Please call TechLine Mfg. for help configuring components needed for your requirements.

Click here to view All 2 1/2 Female Adapter & Square Tube Adapter Cut Sheets

Female Adapter & Square Tube Rack Adapter

TLIS2FA __  __

General Specifications:

   2-1/2” Female Adapter.

• Has 2 1/2” SCH 40 pipe, extension 2” long which provides a female junction for 2” pipe. This female adapter is used with primary modular instrument stand. 2” SCH 40 pipe 9” long is welded to 2 1/2” square tubing 3 1/2” long, .188” wall thickness in carbon steel. Four 5/16” x 1/2” zinc plated hex bolts in square tubing and two in pipe. 

Material:

Carbon steel is standard. Aluminum, 304SS, and 316SS materials available upon request. 

Coating:

Hot dipped galvanized (meeting ASTM A 123-89 specification) is our standard coating. Optional coatings, such as metallizing in and painting, available upon request.

TLIS2FUS __  __

General Specifications:

   2-1/2” Square Tube Rack Adapter for use with primary modular instrument stand

• This modular stand can be mounted horizontally or vertically 1/4” steel plate 5” x 7” with 2 1/2” square tubing. .188” wall thickness. Plate is slotted to accept two U-bolts. 3/8” diameter galvanized U-bolts, nuts and washers are supplied with each or mounting.

Material:

Carbon steel is standard. Aluminum, 304SS, and 316SS materials available upon request.

Coating:

Hot dipped galvanized (meeting ASTM A 123-89 specification) is our standard coating. Optional coatings, such as metallizing in and painting, available upon request.

Ask A Question

* indicates required field