Cantilever Support and Strut Wall Bracket
TechLine Mfg. offers various supports for its Snap Track products including hangers, brackets, and clamps.
TechLine Mfg. cantilever brackets can be built to your specifications. We offer single, double strut and slotted strut. We provide horizontal, vertical, and back-to-back horizontal and offer any length you need, from 4” to 48”
All Strut Wall Bracket/Cantilever Bracket Cut Sheets can be found below the table.
Support Locations- Cable Tray
(Reference: NEMA VE-2 Current Issue)
Supports should be located so that connectors (splice joints) between horizontal runs fall between the support point and quarter point of the span. The Support Span should not be greater than the straight section length. Snap Track tray standard 20’ lengths.
Snap Track Strut Wall Bracket
Used for various mountings of SnapTrack and other support needs.
• Comes in 12”, 18” and 24” lengths. Other lengths available for fabrication upon request.
• Standard 1 5/8” x 1 5/8” Slotted Strut. Also available in Solid Strut.
• Accepts all standard strut fasteners and strut clamps.
• Standard material is Aluminum, SS and Galvanized Carbon Steel are also available.